ES SERIES E-STOP AND GM SERIES GUARD MONITORING SAFETY RELAYS
Manufacturer:
BANNER
- Description
Description
- Modules monitor up to 10 external devices for contact failure or wiring faults
- Module goes into lockout mode if it detects a fault
- Available voltages include 24V dc 24V ac/dc 115V ac or 12 to 24V dc or 230V ac or 12 to 24V ac/dc
- Modules monitor positive-opening E-stop and interlock switches
- Models are available with 2 to 4 normally open safety outputs, depending on module
- Safety outputs are rated 4 or 6 amps, depending on module
- Non-safety auxiliary outputs are available on most modules
- Two modules allow central monitoring and control over a DeviceNet control network
- Ratings are NEMA 1 and at least IEC IP20
- Housings are rugged polycarbonate
- Bright red and green LED indicators show modules operating status
- GM-FA-10J GATE MONITORING MODULE (24 VAC/VDC, SINGLE OR DUAL INPUTS)
- ES-FA-9AA AND ES-FA-11AA SAFETY MODULES INSTRUCTION MANUAL
- ES-FA-9AA AND ES-FA-11AA SAFETY MODULES (SHORT MULTI-LINGUAL)
- ES-UA/VA-5A SAFETY MODULES (4 N.O. SAFETY OUTPUTS, 12-24 V DC/115 OR 230 V AC)
- ES-FA-6G SAFETY MODULE (3 N.O. SAFETY OUTPUTS, 24V AC/DC, 1 INPUT)
- ES-TA-3F1 SAFETY MODULE (2 N.O. SAFETY OUTPUTS, 24V DC, 10 INPUTS, DEVICENET)
- ES-FA-9A SAFETY MODULE (3 N.O. SAFETY OUTPUTS, 24V AC/DC, 1 OR 2 INPUTS)
- ES-TA-3D1 SAFETY MODULE (2 N.O. SAFETY OUTPUTS, 24V DC, 6 INPUTS, DEVICENET)
Related Products
LP Basic Series Compact Type 4 Safety Light Curtains for Simple Applications
Manufacturer:
BANNER
